Spa Frog Systems

Spa Frog Systems allow you to keep bromine levels low in your spa when partnered with the Frog Minerals; the minerals destroy bacteria and reduce bromine use by up to 50%. Spa Frog Systems are much easier on you as far as spa maintenance is concerned. Simply set them and go for weeks at a time. Mineral cartridges will last up to 4 months and bromine cartridges only need to be replaced every 2-4 weeks depending on the use of the spa. No matter which Frog System you use it will make your water clean, sparkling, and soft

 

Inline System

The Spa Frog inline system is factory-installed on selected newer spa models including: Emerald, Saratoga, Caldera, Marquis, Morgan, Watkins Hot Spot, Pacific Hot Tubs, and Leisure Bay spas.

The inline system is built directly into the spa, very easy to use with one bromine cartridge and a mineral cartridge. For easy top loading of replacement cartridges, simply open the cap, pull up the holder and snap them in.

 

Floating System

The Spa Frog Floating System will make your spa the perfect place for soothing relaxation, using up to 50% less bromine. Pre-filled mineral and bromine cartridges simply snap into a reusable floating holder and will work in any spa.

 

Spa Frog Test Strips

The newest product from frog is the Frog Test Strips they are specially formulated for precise reading of low chlorine or bromine levels plus pH and total alkalinity. For use with Frog Mineral Systems that reduce chlorine or bromine use up to 50%. Pool Frog requires at least 0.5 ppm of chlorine while Spa Frog requires at least 1.0 ppm bromine.

Frog Test Strips Test For the Following:

• Free Chlorine 0 - 3.0 ppm

• Bromine 0 - 6.0 ppm

• Alkalinity 0 - 240 ppm

• pH 6.8 - 9.0

• 50 Test Strips

Frog Pool and Spa test strips are also great for any application in which accurate low range bromine or chlorine test results are needed. Experience the mineral benefits of using up to 50% less chlorine or bromine with Pool Frog and Spa Frog test strips.