Fix A Leak - 8 oz

Item #: FAL8
$13.95

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Usually Ships Within 1 Business Day

Notify me when restocked

Item Details

Fix A Leak Hot Tub, Spa and Pool Leak Sealant

If you have a hard to get to leak in your hot tub Fix A Leak is the product for you. Made specifically to quickly solve leak repairs for spas and hot tubs. Fix A Leak is blended concentrated material designed to seal leaks in virtually any material and can be applied for leaks in the shell and works equally well in the plumbing.

Fix A Leak Will:
  • Seals Holes 1/8" in Diameter
  • Forms a Permanent Seal
Dosage:
  • Use 8 ounces per 1,000 gallons of water for minor leaks, A second bottle can be added for larger leaks.
Steps:
  • 1. First determine water loss in a 24 hour period
  • 2. Fill to original level, mark water line
  • 3. Remove all cartridges or filtering devices
  • 4. Slowly add Fix A Leak with pump running through skimmer
  • 5. Recirculate for 6-8 hours. Shut system off
  • 6. Check water level the following day
  • 7. If level remains the same the leak has stopped
  • 8. Allow 48 hours before resuming operation
  • 9. It's recommended not the use spa till leak is fixed and the remainder of Fix A Leak is filtered out.
  • If Leak has slowed and not totally stopped you may add more product to increase strength of solution already in spa.
  • Stir Fix A Leak in the spa with soft broom to get solution back into suspension.
  • Follow steps 5-8 as before.
Product Note:
  • Normally Fix A Leak will seal holes 1/8" in diameter. The product requires pressure to ensure it's impacted into the area of the leak. Leaks created by a crack in a pipe in all probability will be sealed. The leak may reoccur due to vibration which in turn will migrate in size, recreating the leak. Most spas are foam insulated, and when saturated with water, will greatly delay the cure time of Fix A Leak. It would be best to drain spa, immediately wipe down shell with a damp cloth to remove any residue of Fix A Leak. Allow 3-5 days before refilling, in most cases this will allow the product to cure.

Customer Reviews

Based on 169 reviews
76%
(129)
5%
(8)
5%
(9)
5%
(9)
8%
(14)
H
H.O.
Working great so far.....

I was losing 5" of water in two days. I followed the directions both on the bottle and on the web site. After the first "treatment" the leaks almost stopped, losing only 1". So, second treatment used. Now no loss of water in several days. I did empty the spa and let it sit for two days to help "cure" the seals. So far so good, almost all of the area around the spa is now dry, but not all of it. We'll have to wait and see...this might be a low spot in the concrete slab...or?

R
R.M.

Fix A Leak

J
J.
Fix A Leak

This product works as well or better than advertised. My 32 year old outdoor tub shows its age occasionally, but when it leaks, F-A-L always comes through!

E
E.S.

Fix A Leak

B
B.C.
This product works!

I have used this product twice now (5 years apart). it has fixed the slow leaks both times. The spa is 25 years old and had a major overhaul (pumps, heater, controls 10 years ago). It takes some patience as my spa stops after 1 hour of manual operation. The method I use is to keep circulating the water often for a couple of days and stir the product off the bottom with a broom.

S
S.C.

It worked! Leak in hot tub has apparently been plugged.
Thank you!

L
L.L.
Still Leaking

Still leaking after using two bottles.

H
H.B.
Didn't work

Lacked adequate directions

E
E.M.
Leaking around outside of Main Return Jet

Didn't fix my leak and appears to have gotten worse. Looks like I will be draining tub and tearing into it for leak repairs.

R
R.D.
Fix a leak

This is the second time I have used this product and my leak was fixed both times with one dose. Very good product

Recently Viewed