Balboa VS500Z Spa Control System Complete 54219-Z

Item #: 54219-Z
$579.00

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Usually Ships Within 1 Business Day

Notify me when restocked

Item Details

Balboa VS500Z Spa Control System Complete 54219-Z

The Balboa VS500Z Control System Can Operate:
  • (1) 5.5 KW Stainless Steel Heater Assembly (M7 Heater Assembly Included)
  • (1) Two Speed Pump 120 Volt or 240 Volt
  • (1) Ozonator
  • (1) Spa Light

The Balboa VS500Z Control System Includes:
  • VS500Z Control Pack (120 Volt or 240 Volt Convertible System Duplex)
  • Balboa Top Side Control Panel 52487 (3 Button - Temperature, Jets and Lights)
  • Balboa Stainless Steel Heater Assembly with M7 Flow / Temperature sensors
  • Light Housing Assembly and Cord. Excludes Light Lens or Bulb. (Can operate a standard light or LED light)
  • Balboa 11718 Top Side Control Panel Adapter Plate

Features & Benefits:
  • Replaces failure-prone mechanical pressure/flow switch
  • Can be plumbed to either suction or pressure side of pump
  • 120/240V convertible power
  • Custom plastic enclosure
  • M7 flow/ temperature sensors
  • Rigorously tested
  • US & Canadian safety approvals
  • 1 Year Manufacturers Warranty

Why The Balboa Value Pack Retrofit Kit?
The Value Pack Retrofit kit is based on the Value Series (VS) family of hot tub controls which were designed using Balboa's patented M7 temperature and flow sensor technology. The VS systems have a plastic enclosure to eliminate corrosion and suppress water intrusion. Also, the connectors are built onto the circuit board to minimize wires and simplify service. The Value Pack is meant to be installed by a spa professional who can rest easy knowing he's working with a kit that is known for reliability, ease of installation and serviceability.

Thanks to a combination of Balboa engineering and patented M7 technology, we now offer the highest component reliability in the business with fewer returns and longer life expectancy than traditional non-M7 systems. At Balboa, innovative engineering and state-of-the-art manufacturing go hand in hand to deliver a quality, cost effective product that will provide years of reliable, headache-free service.

Patented M7 Technology Includes:

1. Smart Sensor Technology
  • Multiple High Limit Safety Systems
  • All Safety Functions always active
  • Both Sensors are Identical
  • Sensors monitor each other via software to regulate spa functions
  • Ensures a proper operating environment for heater element
  • No Sensor Installation in spa wall
  • No Pressure Switch problems

2. Heater Element and Tube
  • Enlarged bend radius
  • No wire ties
  • Minimizes debris collection

3. Heater Tube
  • No welds required
  • Front mounted
  • Easy access for service

Note:

  • Pump cords sold separately

Balboa 54219-Z

Customer Reviews

Based on 22 reviews
68%
(15)
18%
(4)
5%
(1)
5%
(1)
5%
(1)
M
Matthew Salvia (Stanfordville, US)

Best ever, easy install and works great 👍👍👍

J
Joshua Dean (Corvallis, US)
Pretty solid

Comes with everything you need and pretty good instructions.
Worth!

T
Teresa Gibby (Santa Fe, US)
service was great😆

we ordered the wrong part. customer service was great on refund now need to order the right part.

A
Agustus B.
Item was well packaged and

Item was well packaged and looks like good quality... only issue is that it doesn’t come with a manual

C
Clifton M.
Seemingly bad board in new controller

Installed the new controller/heater assembly and it runs every six hours (Jets and heat) and then when it shuts down you cannot start the jets. Do I get a replacement?

A
Adam T.
Awesome retrofit

Retrofit was perfect and very easy to install!

S
Steven Touchton
WORKS GREAT

EASY TO INSTALL AND SET UP

N
Nate B.
Fast install

Bought this pack to replace my 1991 analog era panel and I have to say, I am very impressed with how will this retrofit kit fit. The largest problem I ran into was that there was no install manual/tech sheet that came with the system, after about 4 hrs of testing before applying power, install came out great, running 240 VAC as a main power and all my accessories run at 120 VAC with the heater running at the full power. And the best part is it only took 6 hrs to heat 600 gal from 40 degrees to 103 degrees.

I would highly recommend this kit to anyone and hot tub warehouse shipped this to me in under a week and during the Christmas and new year week

M
Melinda Milliron
Works great but not easy to figure out

I though it came wired from warehouse for 230 volt motor but after days of not being able to get anything to work. I searched and found a wiring diagrams online for it- it was wired for 120 therefore would not let my pump run. There were no directions as to how wiring should be. Thank god for the Internet and wiring diagram.

r
ron s.
does not keep temp correctly

does not keep temp correctly runs up to 108

Recently Viewed

Customer Reviews

Based on 22 reviews
68%
(15)
18%
(4)
5%
(1)
5%
(1)
5%
(1)
M
Matthew Salvia (Stanfordville, US)

Best ever, easy install and works great 👍👍👍

J
Joshua Dean (Corvallis, US)
Pretty solid

Comes with everything you need and pretty good instructions.
Worth!

T
Teresa Gibby (Santa Fe, US)
service was great😆

we ordered the wrong part. customer service was great on refund now need to order the right part.

A
Agustus B.
Item was well packaged and

Item was well packaged and looks like good quality... only issue is that it doesn’t come with a manual

C
Clifton M.
Seemingly bad board in new controller

Installed the new controller/heater assembly and it runs every six hours (Jets and heat) and then when it shuts down you cannot start the jets. Do I get a replacement?

A
Adam T.
Awesome retrofit

Retrofit was perfect and very easy to install!

S
Steven Touchton
WORKS GREAT

EASY TO INSTALL AND SET UP

N
Nate B.
Fast install

Bought this pack to replace my 1991 analog era panel and I have to say, I am very impressed with how will this retrofit kit fit. The largest problem I ran into was that there was no install manual/tech sheet that came with the system, after about 4 hrs of testing before applying power, install came out great, running 240 VAC as a main power and all my accessories run at 120 VAC with the heater running at the full power. And the best part is it only took 6 hrs to heat 600 gal from 40 degrees to 103 degrees.

I would highly recommend this kit to anyone and hot tub warehouse shipped this to me in under a week and during the Christmas and new year week

M
Melinda Milliron
Works great but not easy to figure out

I though it came wired from warehouse for 230 volt motor but after days of not being able to get anything to work. I searched and found a wiring diagrams online for it- it was wired for 120 therefore would not let my pump run. There were no directions as to how wiring should be. Thank god for the Internet and wiring diagram.

r
ron s.
does not keep temp correctly

does not keep temp correctly runs up to 108