HydroQuip Therm Products Hot Spring Heater - 6 KW

Item #: 26-C3160-1S
$289.95

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Usually Ships Within 1 Business Day

Notify me when restocked

Item Details

Therm Products Hot Spring Heater - 6 KW

Features:

  • Therm Products by HydroQuip Replacement for Hot Spring 6 KW PDR Heater Assemblies
  • Includes both sensors, drain tube, clamps
  • Titanium heating elements
  • Low Flow design improves efficiency
  • Compatible with most Tiger River Spas and Hot Springs systems from 1995 - current
  • Replaces discontinued trumpet style heater assembly
  • 240 Volt

Specifications:

  • Required Flow Rate: 8 GPM
  • Installation: No Modifications Required
  • Element Material: Titanium
  • Wattage: 6000 with 240 Volt System or 1500 Watts with 120 Volt System
  • Voltage: 120 or 240
  • UL Listed
  • Made in the USA

Includes:

  • Sensors
  • 18" of 1" O.D. Tubing
  • 12" of 3/8" O.D. Tubing
  • Barb Coupling 1/4" x 1/4"
  • Instructions
Replaces:
  • Watkins Hot Spring Heaters 73790 and 76227

HydroQuip 26-C3160-1S

Customer Reviews

Based on 44 reviews
84%
(37)
9%
(4)
0%
(0)
2%
(1)
5%
(2)
S
Stan Hunter (Gillette, US)
Tube runs hotter than the No Fault.

The titanium out tube runs hotter than on the No Fault that I replaced it with, however, the HydroQuip has been running well for about a week. It was vertically impossible to talk to anyone from HydroQuip.

J
Jeffrey Dolence (Fairborn, US)
HydroQuip 6KW Hot Springs Heater Replacement

Arrived quickly, no hassle, and replacement was easy. The unit is working great, saved my hot tub from being replaced, and kept me from having to do a major deck modification to “sink” a new tub as they are now a different size.

R
Robert Hecker (Olivehurst, US)
Jetsetter heater

Ordered a spa heater and it was delivered early and fit perfectly

P
P. M. (Seattle, US)
Good heater

Replaced an original Watson 3 wire heater with this an works great. Original heater had a pressure limit switch that connected to the control board. Had to remove the wire from the old heater, twist the two leads together and reconnect the wire into the board to bypass it.

S
Stephanie Sides (Clayton, US)

Fast shipping . Will use this company again

C
Chris Godfrey (West Bloomfield, US)

HydroQuip Therm Products Hot Spring Heater - 6 KW

D
Dean Nicol (Lewis Center, US)
It Fit 20yr old Hot Springs Spa! HydroQuip Therm 6KW

I saved $200 by using this heater on my 20 yr. Old Hot Springs Jetsetter hot tub.it works as it should, heated in good time as old one did. Fast shipping to Ohio in 4 days was delivered on a Saturday. This heater did not have a set of wires that the original did you just cut it off the old heater and twist the 2 wires together. Plug and play on the wires that are on your new heater. Took maybe an hour to put in and no problems in doing so. A great replacement part ! Service was top notch will use again if needed. Thanks

A
AL (Saint Paul, US)
Multiple small issues

The shipping time was amazing. That being said, the wires were not crimped properly and needed to be re-done to have the electricity properly flow. Also the metal heater tubes were an inch longer then the original heater, causing the plastic tubes to be an inch short. Had to run to the hardware store to get some compression fittings to help extend the old tubes. Many small issues that could have been avoided if the part was inspected before it went out for shipping.

G
Gary Gustin (Indianapolis, US)

HydroQuip Therm Products Hot Spring Heater - 6 KW

R
Rick Chick (Spencerport, US)
Hot tube heater

Ordered replacement heater for my hot tube! Plug and play! Great communications! Will come again if I need anything! Thank you!

Recently Viewed

Customer Reviews

Based on 44 reviews
84%
(37)
9%
(4)
0%
(0)
2%
(1)
5%
(2)
S
Stan Hunter (Gillette, US)
Tube runs hotter than the No Fault.

The titanium out tube runs hotter than on the No Fault that I replaced it with, however, the HydroQuip has been running well for about a week. It was vertically impossible to talk to anyone from HydroQuip.

J
Jeffrey Dolence (Fairborn, US)
HydroQuip 6KW Hot Springs Heater Replacement

Arrived quickly, no hassle, and replacement was easy. The unit is working great, saved my hot tub from being replaced, and kept me from having to do a major deck modification to “sink” a new tub as they are now a different size.

R
Robert Hecker (Olivehurst, US)
Jetsetter heater

Ordered a spa heater and it was delivered early and fit perfectly

P
P. M. (Seattle, US)
Good heater

Replaced an original Watson 3 wire heater with this an works great. Original heater had a pressure limit switch that connected to the control board. Had to remove the wire from the old heater, twist the two leads together and reconnect the wire into the board to bypass it.

S
Stephanie Sides (Clayton, US)

Fast shipping . Will use this company again

C
Chris Godfrey (West Bloomfield, US)

HydroQuip Therm Products Hot Spring Heater - 6 KW

D
Dean Nicol (Lewis Center, US)
It Fit 20yr old Hot Springs Spa! HydroQuip Therm 6KW

I saved $200 by using this heater on my 20 yr. Old Hot Springs Jetsetter hot tub.it works as it should, heated in good time as old one did. Fast shipping to Ohio in 4 days was delivered on a Saturday. This heater did not have a set of wires that the original did you just cut it off the old heater and twist the 2 wires together. Plug and play on the wires that are on your new heater. Took maybe an hour to put in and no problems in doing so. A great replacement part ! Service was top notch will use again if needed. Thanks

A
AL (Saint Paul, US)
Multiple small issues

The shipping time was amazing. That being said, the wires were not crimped properly and needed to be re-done to have the electricity properly flow. Also the metal heater tubes were an inch longer then the original heater, causing the plastic tubes to be an inch short. Had to run to the hardware store to get some compression fittings to help extend the old tubes. Many small issues that could have been avoided if the part was inspected before it went out for shipping.

G
Gary Gustin (Indianapolis, US)

HydroQuip Therm Products Hot Spring Heater - 6 KW

R
Rick Chick (Spencerport, US)
Hot tube heater

Ordered replacement heater for my hot tube! Plug and play! Great communications! Will come again if I need anything! Thank you!