Cover Rock-It Cover Lift

Item #: CR

Item Details

Cover Valet Cover Rock-it Lift

The Cover Rock-it lift is affordable, easy to use and fits most spas up to 96" wide. The cover rests down low to the ground with this lift system for a less obstructed view.

Cover Rock-it Features:
  • Requires approximately 18" to 24" of clearance behind the spa
  • Under-mount design doesn't require you to drill into the side of your spa for installation
  • Powder coated metal construction
  • Stainless steel hardware
  • Designed for spas up to 96" wide
  • Limited five year manufacturers warranty

The Cover Rock-It lift will not work on round, hexagon or octagon spa cabinets or on hot tubs with a corner radius of more than 10". If you are not sure which lift will work for you, feel free to contact us and we will help to determine which lift will work best for you.



Customer Reviews

Based on 71 reviews

Cover Rock-It Cover Lift

So So

It’s an ok lift, kind of light duty!

Just Right

Perfect item for my situation...easy to set up...easy to use...looks great...keeps cover off ground!

Loving life! Easy to install.

So easy to put on and take off cover. My young daughter can do it by herself. I wanted something that’s not drilled into the tub, I looked at another more expensive one, this was basically the same thing. All parts were there, Fast shipping and price was right, couldn’t ask for more.

Sturdy - but needed to modify

So far so good on the lift. The only problem was that one extension bar was too short, but two extension bars was too long - so I had to cut the 2nd bar, drill 3 holes and paint. But after that - working great.

Easy to install and works

Easy to install and works great

Fast shipping, good price. Works OK.

This cover lifter works. It's not the best lifter, but I'm frugal and don't see a need for a $800 lifter. The feet on one side of my tub moves a little due to the flexibility of the overall construction. However, if you lift with the handle and use your other arm to lift in the center then it works fine. Would buy again for the price.


We purchased this cover valet with the knowledge that it required up to a 24" clearance and would fit a 8 ft. tub. Our hot tub is in the corner of our home. We gave enough clearance but it still did not work and was very flimsy. It also did not work well getting the cover off with our 8 ft. tub. The cover still hit the house when open. I was told since I had to drill holes in the metal to construct the valet I was unable to return for any type of refund. May work for a smaller hot tub in the open but not for mine.

Very well made for a square cornered and vertical sided hot tub.

Very well made but best fits a square hot tub with nearly square corners and nearly vertical sides. This lift is not perfect for my Aquaterra Brighton cover. I may need to bolt the plates to my concrete surface as they do not slide far enough under the tub.

Simple cover, easy to install

Fits well, no need to empty tub to secure the bottom plates (rubber mallet), handles the top easily. Use an ample sized board under the self tapping screws to be sure that you don't slip and poke the cover. Common sense, but I've heard of others poking holes.

Recently Viewed