E5 Spa Circulation Pump 74427

Item #: 74427
$169.95

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Usually Ships Within 1 Business Day

Notify me when restocked

Item Details

E5 Spa Circulation Pump 74427

Laing E5 Circulation pump for Watkins Caldera, Hot Spring and Tiger River Spa brands.

Specifications:
  • Volts: 115V
  • Watts: 39
  • Flow Rate: Up to 6,000 gallons in 24 hours
  • Cord Included
Features:
  • Increased capacity and more energy efficient than previous models
  • Magnetic drive slowly slowly starts to insure that it's well primed with water.
  • Water lubricated that should not be operated without water in the spa. If the pump does run dry, it has an internal safety device (thermal cut-off) that will automatically shut it off should it overheat. You can reset the pump by turning it off for 10 seconds then turn it back on.
Additional Information:
  • This pump replaces the SilentFlo 5000 (Part # 72204) and all previous style single speed circulation pumps on all Caldera, Hot Spring and Tiger River spa models.
  • This newer model does not have the bonding lug as it is no longer required. Just make sure the green wire in the cord is connected to a grounding location inside the controller.
  • Also used in many more brands of hot tubs!
Brands and Model Numbers:
  • Watkins 74427
  • Hot Springs 74427
  • Caldera 74427
  • Tiger River 74427
  • HydroQuip 10-0102-K
  • Laing E5-NCHNNNN3W-10

Customer Reviews

Based on 198 reviews
85%
(169)
7%
(14)
5%
(10)
1%
(2)
2%
(3)
N
Neile Machner (Browns Mills, US)
Great Customer Service and Fast Shipping

I had questions regarding my purchase, my e-mails were responded to very quickly and the part has been installed. The shipping was quick, would purchase form again.

W
Will B (Missoula, US)
Perfect replacement part

Not the same make and model as the original, but an almost exact substitute. Works great!

1
17717 E Colt Dr Applegate (Queen Creek, US)

Works great

W
William Steinmetz (Springfield, US)
circ pump

Easy to replace as it was the same model that failed. Unscrew one and screw in the other, just clamp the hoses for a few seconds. Quiet and working well. Just
hope it lasts longer than the other/4 yrs.

R
Robert Landry (Folsom, US)
As advertised

Identical replacement part, fit/worked perfectly, fast shipping, fair price! I will order parts from them again.

M
Michael Faria (Green Cove Springs, US)
Service

Service was great said the pump would arrive in three days and got to me in two days.

R
Rey Ramirez (Puyallup, US)
One month later and still runs like a champ

I bought this to replace the original circulation pump in my '08 Caldera Springs Niagara. Be aware that the inlet/outlet sizes on the new pumps are smaller; you can use a ~1 inch section of tubing on each end to match the new, small size to the old, larger hoses.

J
John Moberg (Denver, US)
Vanguard circulation pump

This pump fit perfectly as the replacement of our vanguard circulation pump. Whisper quiet. You need to supply the wire ends. I'm very pleased with the pump and Hot Tub Warehouse.

H
Homeowner (Englewood, US)
Fast shipping

Quickly and easily replaced the original Watkins pump in my Hot Springs spa. Would be helpful if it included connectors on the lead wires, which it does not.

J
John Meyer
Easy Job

Pump is a perfect replacement except that it comes with no terminals. Yu can either crimp or solder new terminals yourself or cut and splice the cable from the original. I chose the latter approach. Pump fits like a glove and solved the problem.

Recently Viewed

Customer Reviews

Based on 198 reviews
85%
(169)
7%
(14)
5%
(10)
1%
(2)
2%
(3)
N
Neile Machner (Browns Mills, US)
Great Customer Service and Fast Shipping

I had questions regarding my purchase, my e-mails were responded to very quickly and the part has been installed. The shipping was quick, would purchase form again.

W
Will B (Missoula, US)
Perfect replacement part

Not the same make and model as the original, but an almost exact substitute. Works great!

1
17717 E Colt Dr Applegate (Queen Creek, US)

Works great

W
William Steinmetz (Springfield, US)
circ pump

Easy to replace as it was the same model that failed. Unscrew one and screw in the other, just clamp the hoses for a few seconds. Quiet and working well. Just
hope it lasts longer than the other/4 yrs.

R
Robert Landry (Folsom, US)
As advertised

Identical replacement part, fit/worked perfectly, fast shipping, fair price! I will order parts from them again.

M
Michael Faria (Green Cove Springs, US)
Service

Service was great said the pump would arrive in three days and got to me in two days.

R
Rey Ramirez (Puyallup, US)
One month later and still runs like a champ

I bought this to replace the original circulation pump in my '08 Caldera Springs Niagara. Be aware that the inlet/outlet sizes on the new pumps are smaller; you can use a ~1 inch section of tubing on each end to match the new, small size to the old, larger hoses.

J
John Moberg (Denver, US)
Vanguard circulation pump

This pump fit perfectly as the replacement of our vanguard circulation pump. Whisper quiet. You need to supply the wire ends. I'm very pleased with the pump and Hot Tub Warehouse.

H
Homeowner (Englewood, US)
Fast shipping

Quickly and easily replaced the original Watkins pump in my Hot Springs spa. Would be helpful if it included connectors on the lead wires, which it does not.

J
John Meyer
Easy Job

Pump is a perfect replacement except that it comes with no terminals. Yu can either crimp or solder new terminals yourself or cut and splice the cable from the original. I chose the latter approach. Pump fits like a glove and solved the problem.