HydroQuip Therm Products Hot Spring Heater - 6 KW

Item #: 26-C3160-1S
$289.95

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Usually Ships Within 1 Business Day

Notify me when restocked

Item Details

Therm Products Hot Spring Heater - 6 KW

Features:

  • Therm Products by HydroQuip Replacement for Hot Spring 6 KW PDR Heater Assemblies
  • Includes both sensors, drain tube, clamps
  • Titanium heating elements
  • Low Flow design improves efficiency
  • Compatible with most Tiger River Spas and Hot Springs systems from 1995 - current
  • Replaces discontinued trumpet style heater assembly
  • 240 Volt

Specifications:

  • Required Flow Rate: 8 GPM
  • Installation: No Modifications Required
  • Element Material: Titanium
  • Wattage: 6000 with 240 Volt System or 1500 Watts with 120 Volt System
  • Voltage: 120 or 240
  • UL Listed
  • Made in the USA

Includes:

  • Sensors
  • 18" of 1" O.D. Tubing
  • 12" of 3/8" O.D. Tubing
  • Barb Coupling 1/4" x 1/4"
  • Instructions
Replaces:
  • Watkins Hot Spring Heaters 73790 and 76227

HydroQuip 26-C3160-1S

Customer Reviews

Based on 38 reviews
84%
(32)
8%
(3)
0%
(0)
3%
(1)
5%
(2)
D
Dean Nicol (Lewis Center, US)
It Fit 20yr old Hot Springs Spa! HydroQuip Therm 6KW

I saved $200 by using this heater on my 20 yr. Old Hot Springs Jetsetter hot tub.it works as it should, heated in good time as old one did. Fast shipping to Ohio in 4 days was delivered on a Saturday. This heater did not have a set of wires that the original did you just cut it off the old heater and twist the 2 wires together. Plug and play on the wires that are on your new heater. Took maybe an hour to put in and no problems in doing so. A great replacement part ! Service was top notch will use again if needed. Thanks

A
AL (Saint Paul, US)
Multiple small issues

The shipping time was amazing. That being said, the wires were not crimped properly and needed to be re-done to have the electricity properly flow. Also the metal heater tubes were an inch longer then the original heater, causing the plastic tubes to be an inch short. Had to run to the hardware store to get some compression fittings to help extend the old tubes. Many small issues that could have been avoided if the part was inspected before it went out for shipping.

G
Gary Gustin (Indianapolis, US)

HydroQuip Therm Products Hot Spring Heater - 6 KW

R
Rick Chick (Spencerport, US)
Hot tube heater

Ordered replacement heater for my hot tube! Plug and play! Great communications! Will come again if I need anything! Thank you!

D
Danny G (Bound Brook, US)
The right part

The replacement heater was exactly the right part, took a bit of engineering but we were able to install. Shipping was slow, and confusing (shipped, cancelled, re-shipped).

D
Daniel Barbuto (Hingham, US)

HydroQuip Therm Products Hot Spring Heater - 6 KW

C
Chris Jones (Chatham, CA)
Spa heater

Installed new heater into my hot springs hot tub. Very easy to install worked great.

j
jed vandemerwe (Ogden, US)
hot tub heater

Heater arrived with additional connections included. :)
Is working fabulously.

E
Eric Pfister (Kansas City, US)
Spa heater

Timely delivery, fair price and installed without issue. Spa temps are stable. Thank you. E

S
Scott McGee (Gardner, US)
Not quite a direct drop in

Heater is the same physical size and come with the two integrated thermal and high limit sensors, but does not have the pressure switch that my OEM heater has. This pressure switch ensures the heater only operates as long as there is water flow(pressure) from the circulator pump.

Recently Viewed

Customer Reviews

Based on 38 reviews
84%
(32)
8%
(3)
0%
(0)
3%
(1)
5%
(2)
D
Dean Nicol (Lewis Center, US)
It Fit 20yr old Hot Springs Spa! HydroQuip Therm 6KW

I saved $200 by using this heater on my 20 yr. Old Hot Springs Jetsetter hot tub.it works as it should, heated in good time as old one did. Fast shipping to Ohio in 4 days was delivered on a Saturday. This heater did not have a set of wires that the original did you just cut it off the old heater and twist the 2 wires together. Plug and play on the wires that are on your new heater. Took maybe an hour to put in and no problems in doing so. A great replacement part ! Service was top notch will use again if needed. Thanks

A
AL (Saint Paul, US)
Multiple small issues

The shipping time was amazing. That being said, the wires were not crimped properly and needed to be re-done to have the electricity properly flow. Also the metal heater tubes were an inch longer then the original heater, causing the plastic tubes to be an inch short. Had to run to the hardware store to get some compression fittings to help extend the old tubes. Many small issues that could have been avoided if the part was inspected before it went out for shipping.

G
Gary Gustin (Indianapolis, US)

HydroQuip Therm Products Hot Spring Heater - 6 KW

R
Rick Chick (Spencerport, US)
Hot tube heater

Ordered replacement heater for my hot tube! Plug and play! Great communications! Will come again if I need anything! Thank you!

D
Danny G (Bound Brook, US)
The right part

The replacement heater was exactly the right part, took a bit of engineering but we were able to install. Shipping was slow, and confusing (shipped, cancelled, re-shipped).

D
Daniel Barbuto (Hingham, US)

HydroQuip Therm Products Hot Spring Heater - 6 KW

C
Chris Jones (Chatham, CA)
Spa heater

Installed new heater into my hot springs hot tub. Very easy to install worked great.

j
jed vandemerwe (Ogden, US)
hot tub heater

Heater arrived with additional connections included. :)
Is working fabulously.

E
Eric Pfister (Kansas City, US)
Spa heater

Timely delivery, fair price and installed without issue. Spa temps are stable. Thank you. E

S
Scott McGee (Gardner, US)
Not quite a direct drop in

Heater is the same physical size and come with the two integrated thermal and high limit sensors, but does not have the pressure switch that my OEM heater has. This pressure switch ensures the heater only operates as long as there is water flow(pressure) from the circulator pump.