Balboa VS510SZ Spa Control System Complete 54218-Z

Item #: 54218-Z

This Product is no longer avaliable

We apologize for any inconveniences

Please try one of these alternatives below

Balboa BP7 Series Control System G6406

Balboa BP7 Control System G6405-01

Item Details

Balboa VS510SZ Spa Control System Complete 54218-Z

The Balboa VS510SZ Control System Can Operate:
  • (1) 5.5 KW Stainless Steel Heater Assembly (M7 Heater Assembly Included)
  • (1) Two Speed Pump 120 Volt or 240 Volt
  • (1) Single Speed Pump
  • (1) Blower 120 Volt or 240 Volt
  • (1) Ozonator
  • (1) Spa Light
(If installing a circulation pump it must run at least 23 Gallons Per Minute)

The Balboa VS510SZ Control System Includes:
  • VS510SZ Control Pack (120 Volt or 240 Volt Convertible)
  • Balboa Top Side Control Panel 53189-01 (Jets 1, Jets 2, Light, Blower, Mode and Temperature Up (Warm) Temperature Down (Cool) Buttons.)
  • Balboa Stainless Steel Heater Assembly with M7 Flow / Temperature sensors
  • Light Housing Assembly and Cord. Excludes Light Lens or Bulb. (Can operate a standard light or LED light)
  • Balboa Panel Overlay 10402
  • Balboa 10165 Top Side Control Panel Adapter Plate

Features and Benefits:
  • Replaces failure-prone mechanical pressure/flow switch
  • Can be plumbed to either suction or pressure side of pump
  • 120/240V convertible power
  • Custom plastic enclosure
  • M7 flow/ temperature sensors
  • Rigorously tested
  • US & Canadian safety approvals

Why The Balboa Value Pack Retrofit Kit?
The Value Pack Retrofit kit is based on the Value Series (VS) family of hot tub controls which were designed using Balboa's patented M7 temperature and flow sensor technology. The VS systems have a plastic enclosure to eliminate corrosion and suppress water intrusion. Also, the connectors are built onto the circuit board to minimize wires and simplify service. The Value Pack is meant to be installed by a spa professional who can rest easy knowing he's working with a kit that is known for reliability, ease of installation and serviceability.

Thanks to a combination of Balboa engineering and patented M7 technology, we now offer the highest component reliability in the business with fewer returns and longer life expectancy than traditional non-M7 systems. At Balboa, innovative engineering and state-of-the-art manufacturing go hand in hand to deliver a quality, cost effective product that will provide years of reliable, headache-free service.

Patented M7 Technology Includes:

Smart Sensor Technology
  • Multiple High Limit Safety Systems
  • All Safety Functions always active
  • Both Sensors are Identical
  • Sensors monitor each other via software to regulate spa functions
  • Ensures a proper operating environment for heater element
  • No Sensor Installation in spa wall
  • No Pressure Switch problems

Heater Element and Tube
  • Enlarged bend radius
  • No wire ties
  • Minimizes debris collection

Heater Tube
  • No welds required
  • Front mounted
  • Easy access for service

Note:

  • Pump cords sold separately
Balboa 54218-Z

Customer Reviews

Based on 129 reviews
81%
(105)
11%
(14)
5%
(6)
2%
(2)
2%
(2)
J
Jeremy Klima (Delhi, US)
Excellent company

Great company. Will definitely use next time

s
shawn marach
love it!

my spa is a 1997 California cooperage that finally died. the balboa kit it brought it back to life! everything is working perfectly again. it's been installed for a week now with zero issues

d
duane hall (Medford, US)
great device

works good and was easy to install. Only complaint is that control panel is hard to operate

R
Robert Rutledge (Homosassa, US)
old plugs needed replacing

Worked fine once I replaced the old pump and blower plugs with new ones to fit the receptacles in the Balboa (a learning opportunity.)

R
Rick Moss
New life for an old hot tub!

Seems to be a quality kit with clear instructions. Would definitely recommend this to bring your old spa back to life!

J
John Kowalik (Blacksburg, US)
Works great, easy to install

Replaced a Spa builders LX-15. Had to cut the opening for the control panel larger for it to fit. Make sure you double check the power wiring inside the unit for your pump, etc. The instructions that came in the box said it was pre-wired for 120v for the pump, but it was actually pre-wired for 240v. It was easy to change the connection, but if I didn't check I would have fried my pump.

M
Mark Hodge (Oneida, US)
Balboa VS510SZ Spa Control

The circuit board burnt up on my hot tub for the second time. I bought the Balboa Spa Control System and plumbed it into my existing pumps, added the new control panel, and it was working better than it ever had. It heated up faster, and I still have all the functions I'm used to having. Well done Balboa!

A
Adam Thompson (Durham, US)

Balboa VS501Z Spa Control System Complete 54217-Z

T
Theodore Boggs (Roanoke, US)
Replacement of heat pack

Order arrived on time and by following basic instructions I was able to hook up the system followed by filling the tub and flipping the breaker. It has been running perfectly since installation. I recommend you and your product.

F
Frank Borrelli (Rochester, US)

Control system balboa vs510sb

Recently Viewed

Customer Reviews

Based on 129 reviews
81%
(105)
11%
(14)
5%
(6)
2%
(2)
2%
(2)
J
Jeremy Klima (Delhi, US)
Excellent company

Great company. Will definitely use next time

s
shawn marach
love it!

my spa is a 1997 California cooperage that finally died. the balboa kit it brought it back to life! everything is working perfectly again. it's been installed for a week now with zero issues

d
duane hall (Medford, US)
great device

works good and was easy to install. Only complaint is that control panel is hard to operate

R
Robert Rutledge (Homosassa, US)
old plugs needed replacing

Worked fine once I replaced the old pump and blower plugs with new ones to fit the receptacles in the Balboa (a learning opportunity.)

R
Rick Moss
New life for an old hot tub!

Seems to be a quality kit with clear instructions. Would definitely recommend this to bring your old spa back to life!

J
John Kowalik (Blacksburg, US)
Works great, easy to install

Replaced a Spa builders LX-15. Had to cut the opening for the control panel larger for it to fit. Make sure you double check the power wiring inside the unit for your pump, etc. The instructions that came in the box said it was pre-wired for 120v for the pump, but it was actually pre-wired for 240v. It was easy to change the connection, but if I didn't check I would have fried my pump.

M
Mark Hodge (Oneida, US)
Balboa VS510SZ Spa Control

The circuit board burnt up on my hot tub for the second time. I bought the Balboa Spa Control System and plumbed it into my existing pumps, added the new control panel, and it was working better than it ever had. It heated up faster, and I still have all the functions I'm used to having. Well done Balboa!

A
Adam Thompson (Durham, US)

Balboa VS501Z Spa Control System Complete 54217-Z

T
Theodore Boggs (Roanoke, US)
Replacement of heat pack

Order arrived on time and by following basic instructions I was able to hook up the system followed by filling the tub and flipping the breaker. It has been running perfectly since installation. I recommend you and your product.

F
Frank Borrelli (Rochester, US)

Control system balboa vs510sb